• Product*
  12AF35LVE 1EF600-22 1VF200PRO
• Cartridge Size*

  oz

• Stud Diameter*
  Please select... 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2

• Embedment Depth

  in

• No of Holes Required
• Waste Factor Percentage
  0%5%10%15%20%25%
• No of Holes Filled Per Cartridge:
• No of Cartridges Needed:
• Distance to Epoxy Fill Line (to a 1/16") as Measured from Outside Surface of Drilled Hole:

  in

• ADD TO CART SHARE

* These calculations are based on negligible waste in cartridge, annulus volume between pitch thread diameter and mean drill bit diameter such that filling holes to level shown will ensure that the published performance is achieved. Concrete hole diameter is based on Allfasteners technical data sheets. This information is for guidance only, and Allfasteners is not responsible for any shortages or overstock as a result of ordering quantities estimated using this calculator tool.

** Nominal embedment depths for adhesive anchor range